View MAX31855JASA_9135407.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

general description the max31855 performs cold-junction compensation and digitizes the signal from a k-, j-, n-, t-, s-, r-, or e-type thermocouple. the data is output in a signed 14-bit, spi-compatible, read-only format. this converter resolves temperatures to 0.25c, allows readings as high as +1800c and as low as -270c, and exhibits thermocouple accuracy of 2c for temperatures ranging from -200c to +700c for k-type thermocouples. for full range accuracies and other thermocouple types, see the thermal characteristics specifications. applications industrial appliances hvac beneits and features integration reduces design time and lowers system cost ? 14-bit, 0.25c resolution converter ? integrated cold-junction compensation ? versions available for most common thermocouple types: k-, j-, n-, t-, s-, r-, and e-type ? detects thermocouple shorts to gnd or v cc ? detects open thermocouple interfaces to most microcontrollers ? simple spi-compatible interface (read-only) ordering information appears at end of data sheet. for related parts and recommended products to use with this part, refer to www.maximintegrated.com/max31855.related . 19-5793; rev 5; 1/15 v cc gnd t+ t- so sck cs microcontroller miso sck ss 0.1f max31855 max31855 cold-junction compensated thermocouple-to-digital converter typical application circuit downloaded from: http:///
supply voltage range (v cc to gnd)...................-0.3v to +4.0v all other pins............................................. -0.3v to (v cc + 0.3v) continuous power dissipation (t a = +70c) so (derate 5.9mw/c above +70c).......................470.6mw esd protection (all pins, human body model)....................2kv operating temperature range......................... -40c to +125c junction temperature......................................................+150c storage temperature range ........................... -65c to +150c lead temperature (soldering, 10s).................................+300c soldering temperature (reflow) ......................................+260c so junction-to-ambient thermal resistance ( ja ) ........ 170c/w junction-to-case thermal resistance ( jc ) ............... 40c/w (note 1) (t a = -40c to +125c, unless otherwise noted.) (3.0v v cc p 3.6v, t a = -40c to +125c, unless otherwise noted.) parameter symbol conditions min typ max units power-supply voltage v cc (note 2) 3.0 3.3 3.6 v input logic 0 v il -0.3 +0.8 v input logic 1 v ih 2.1 v cc + 0.3 v parameter symbol conditions min typ max units power-supply current i cc 900 1500 a thermocouple input bias current t a = -40c to +125c, 100mv across the thermocouple inputs -100 +100 na power-supply rejection -0.3 c/v power-on reset voltage threshold v por (note 3) 2 2.5 v power-on reset voltage hysteresis 0.2 v output high voltage v oh i out = -1.6ma v cc - 0.4 v output low voltage v ol i out = 1.6ma 0.4 v max31855 cold-junction compensated thermocouple-to-digital converter www.maximintegrated.com maxim integrated 2 note 1: package thermal resistances were obtained using the method described in jedec specification jesd51-7, using a four-layer board. for detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial . absolute maximum ratings stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. these are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. package thermal characteristicsrecommended operating conditions dc electrical characteristics downloaded from: http:///
(3.0v v cc p 3.6v, t a = -40c to +125c, unless otherwise noted.) (note 4) parameter symbol conditions min typ max units max31855k thermocouple temperature gain and offset error (41.276v/c nominal sensitivity) (note 4) t thermocouple = -200c to +700c, t a = -20c to +85c (note 3) -2 +2 c t thermocouple = +700c to +1350c, t a = -20c to +85c (note 3) -4 +4 t thermocouple = -270c to +1372c, t a = -40c to +125c (note 3) -6 +6 max31855j thermocouple temperature gain and offset error (57.953v/c nominal sensitivity) (note 4) t thermocouple = -210c to +750c, t a = -20c to +85c (note 3) -2 +2 c t thermocouple = -210c to +1200c, t a = -40c to +125c (note 3) -4 +4 max31855n thermocouple temperature gain and offset error (36.256v/c nominal sensitivity) (note 4) t thermocouple = -200c to +700c, t a = -20c to +85c (note 3) -2 +2 c t thermocouple = +700c to +1300c, t a = -20c to +85c (note 3) -4 +4 t thermocouple = -270c to +1300c, t a = -40c to +125c (note 3) -6 +6 max31855t thermocouple temperature gain and offset error (52.18v/c nominal sensitivity) (note 4) t thermocouple = -270c to +400c, t a = -20c to +85c (note 3) -2 +2 c t thermocouple = -270c to +400c, t a = -40c to +125c (note 3) -4 +4 max31855e thermocouple temperature gain and offset error (76.373v/c nominal sensitivity) (note 4) t thermocouple = -200c to +700c, t a = -20c to +85c (note 3) -2 +2 c t thermocouple = +700c to +1000c, t a = -20c to +85c (note 3) -3 +3 t thermocouple = -270c to +1000c, t a = -40c to +125c (note 3) -5 +5 max31855r thermocouple temperature gain and offset error (10.506v/c nominal sensitivity) (note 4) t thermocouple = -50c to +700c, t a = -20c to +85c (note 3) -2 +2 c t thermocouple = +700c to +1768c, t a = -20c to +85c (note 3) -4 +4 t thermocouple = -50c to +1768c, t a = -40c to +125c (note 3) -6 +6 max31855s thermocouple temperature gain and offset error (9.587v/c nominal sensitivity) (note 4) t thermocouple = -50c to +700c, t a = -20c to +85c (note 3) -2 +2 c t thermocouple = +700c to +1768c, t a = -20c to +85c (note 3) -4 +4 t thermocouple = -50c to +1768c, t a = -40c to +125c (note 3) -6 +6 max31855 cold-junction compensated thermocouple-to-digital converter www.maximintegrated.com maxim integrated 3 thermal characteristics downloaded from: http:///
(3.0v v cc p 3.6v, t a = -40c to +125c, unless otherwise noted.) (note 4) (see figure 1 and figure 2 .) note 2: all voltages are referenced to gnd. currents entering the ic are specified positive, and currents exiting the ic are negative. note 3: guaranteed by design; not production tested. note 4: not including cold-junction temperature error or thermocouple nonlinearity. note 5: specification is 100% tested at t a = +25c. specification limits over temperature (t a = t min to t max ) are guaranteed by design and characterization; not production tested. note 6: because the thermocouple temperature conversions begin at v por , depending on v cc slew rates, the first thermocouple temperature conversion may not produce an accurate result. therefore, the t conv_pu specification is required after v cc is greater than v ccmin to guarantee a valid thermocouple temperature conversion result. note 7: for all pins except t+ and t- (see the thermocouple input bias current parameter in the dc electrical characteristics table). parameter symbol conditions min typ max units thermocouple temperature data resolution 0.25 c internal cold-junction temperature error t a = -20c to +85c (note 3) -2 +2 c t a = -40c to +125c (note 3) -3 +3 cold-junction temperature data resolution t a = -40c to +125c 0.0625 c temperature conversion time (thermocouple, cold junction, fault detection) t conv (note 5) 70 100 ms thermocouple conversion power-up time t conv_pu (note 6) 200 ms parameter symbol conditions min typ max units input leakage current i leak (note 7) -1 +1 a input capacitance c in 8 pf serial-clock frequency f scl 5 mhz sck pulse-high width t ch 100 ns sck pulse-low width t cl 100 ns sck rise and fall time 200 ns cs fall to sck rise t css 100 ns sck to cs hold 100 ns cs fall to output enable t dv 100 ns cs rise to output disable t tr 40 ns sck fall to output data valid t do 40 ns cs inactive time (note 3) 200 ns max31855 cold-junction compensated thermocouple-to-digital converter www.maximintegrated.com maxim integrated 4 thermal characteristics (continued) serial-interface timing characteristics downloaded from: http:///
figure 1. serial-interface protocol figure 2. serial-interface timing cs sck so d31 d8 d7 d6 d5 d4 d3 d2 d1 d0 d31 d0 d1 d2 d3 sck so t dv t css t do cs t tr t ch t cl max31855 cold-junction compensated thermocouple-to-digital converter www.maximintegrated.com maxim integrated 5 serial-interface diagrams downloaded from: http:///
(v cc = +3.3v, t a = +25c, unless otherwise noted.) internal temperature sensor accuracy max31855 toc02 temperature (c) measurement error (c) 80 60 20 40 0 -20 -0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 -0.2 -40 100 v cc = 3.3v note: this data was taken in precision bath so high temperature limit is 90c adc accuracy vs. adc input voltage across temperature max31855 toc03 adc input voltage (mv) adc accuracy (c) 40 20 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0 0.1 0.2 0.3 -0.7 0 60 at -40c v cc = 3.3v at +85c at +25c adc accuracy vs. adc input voltage across v cc max31855 toc04 adc input voltage (mv) adc accuracy (c) 40 20 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0 -1.0 0 60 v cc = 3.6v v cc = 3.3v v cc = 3.0v internal temperature = +25c supply current vs. temperature max31855 toc01 temperature (c) supply current (ma) 100 120 80 60 40 20 0 -20 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 -40 v cc = 3.6v v cc = 3.3v v cc = 3.0v maxim integrated 6 www.maximintegrated.com max31855 cold-junction compensated thermocouple-to-digital converter typical operating characteristics downloaded from: http:///
pin name function 1 gnd ground 2 t- thermocouple input. see table 1. do not connect to gnd. 3 t+ thermocouple input. see table 1. 4 v cc power-supply voltage 5 sck serial-clock input 6 cs active-low chip select. set cs low to enable the serial interface. 7 so serial-data output 8 dnc do not connect cssck v cc 1 + 2 8 7 dncso t- t+ gnd so top view 3 4 6 5 max31855 max31855 adc digital control cold-junction compensation fault detection reference voltage s4 s1 s2 s3 s5 sck v cc v cc socs gnd t+ t- max31855 cold-junction compensated thermocouple-to-digital converter www.maximintegrated.com maxim integrated 7 pin description pin conigurationblock diagram downloaded from: http:///
detailed description the max31855 is a sophisticated thermocouple-to-digital converter with a built-in 14-bit analog-to-digital converter (adc). the device also contains cold-junction compensa - tion sensing and correction, a digital controller, an spi- compatible interface, and associated control logic. the device is designed to work in conjunction with an external microcontroller (c) in thermostatic, process-control, or monitoring applications. the device is available in several versions, each optimized and trimmed for a specific thermo - couple type (k, j, n, t, s, r, or e.). the thermocouple type is indicated in the suffix of the part number (e.g., max31855k). see the ordering information table for all options. temperature conversion the device includes signal-conditioning hardware to con - vert the thermocouples signal into a voltage compatible with the input channels of the adc. the t+ and t- inputs connect to internal circuitry that reduces the introduction of noise errors from the thermocouple wires. before converting the thermoelectric voltages into equiva - lent temperature values, it is necessary to compensate for the difference between the thermocouple coldjunction side (device ambient temperature) and a 0c virtual ref - erence. for a k-type thermocouple, the voltage changes by about 41v/c, which approximates the thermocouple characteristic with the following linear equation: v out = (41.276v/c) x (t r - t amb ) where v out is the thermocouple output voltage (v), t r is the temperature of the remote thermocouple junction (c), and t amb is the temperature of the device (c). other thermocouple types use a similar straight-line approximation but with different gain terms. note that the max31855 assumes a linear relationship between tem - perature and voltage. because all thermocouples exhibit some level of nonlinearity, apply appropriate correction to the devices output data. cold-junction compensation the function of the thermocouple is to sense a difference in temperature between two ends of the thermocouple wires. the thermocouples hot junction can be read across the operating temperature range ( table 1 ). the reference junction, or cold end (which should be at the table 1. thermocouple wire connections and nominal sensitivities type t- wire t+ wire temp range (c) sensitivity (v/c) cold-junction sensitivity (v/c) (0c to +70c) k alumel chromel -270 to +1372 41.276 (0c to +1000c) 40.73 j constantan iron -210 to +1200 57.953 (0c to +750c) 52.136 n nisil nicrosil -270 to + 1300 36.256 (0c to +1000c) 27.171 s platinum platinum/rhodium -50 to +1768 9.587 (0c to +1000c) 6.181 t constantan copper -270 to +400 52.18 (0c to +400c) 41.56 e constantan chromel -270 to +1000 76.373 (0c to +1000c) 44.123 r platinum platinum/rhodium -50 to +1768 10.506 (0c to +1000c) 6.158 max31855 cold-junction compensated thermocouple-to-digital converter www.maximintegrated.com maxim integrated 8 downloaded from: http:///
same temperature as the board on which the device is mounted) can range from -55c to +125c. while the temperature at the cold end fluctuates, the device contin - ues to accurately sense the temperature difference at the opposite end. the device senses and corrects for the changes in the reference junction temperature with cold-junction com - pensation. it does this by first measuring its internal die temperature, which should be held at the same tem - perature as the reference junction. it then measures the voltage from the thermocouples output at the reference junction and converts this to the noncompensated ther - mocouple temperature value. this value is then added to the devices die temperature to calculate the thermo - couples hot junction temperature. note that the hot junction temperature can be lower than the cold junction (or reference junction) temperature. optimal performance from the device is achieved when the thermocouple cold junction and the device are at the same temperature. avoid placing heat-generating devices or components near the max31855 because this could produce cold-junction-related errors. conversion functions during the conversion time, t conv , three functions are performed: the temperature conversion of the internal cold-junction temperature, the temperature conversion of the external thermocouple, and the detection of thermo - couple faults. when executing the temperature conversion for the inter - nal cold-junction compensation circuit, the connection to signal from the external thermocouple is opened (switch s4) and the connection to the cold-junction compensa - tion circuit is closed (switch s5). the internal t- reference to ground is still maintained (switch s3 is closed) and the connections to the fault-detection circuit are open (switches s1 and s2). when executing the temperature conversion of the external thermocouple, the connections to the internal fault-detection circuit are opened (switches s1 and s2 in the block diagram ) and the switch connecting the cold - junction compensation circuit is opened (switch s5). the internal ground reference connection (switch s3) and the connection to the adc (switch s4) are closed. this allows the adc to process the voltage detected across the t+ and t- terminals. during fault detection, the connections from the external thermocouple and cold-junction compensation circuit to the adc are opened (switches s4 and s5). the internal ground reference on t- is also opened (switch s3). the connections to the internal fault-detection circuit are closed (switch s1 and s2). the fault-detection circuit tests for shorted connections to v cc or gnd on the t+ and t- inputs, as well as looking for an open thermocouple condi - tion. bits d0, d1, and d2 of the output data are normally low. bit d2 goes high to indicate a thermocouple short to v cc , bit d1 goes high to indicate a thermocouple short to gnd, and bit d0 goes high to indicate a thermocouple open circuit. if any of these conditions exists, bit d16 of the so output data, which is normally low, also goes high to indicate that a fault has occurred. serial interface the typical application circuit shows the device inter - faced with a microcontroller. in this example, the device processes the reading from the thermocouple and trans - mits the data through a serial interface. drive cs low and apply a clock signal at sck to read the results at so. conversions are always being performed in the background. the fault and temperature data are only be updated when cs is high. drive cs low to output the first bit on the so pin. a com - plete serial-interface read of the cold-junction compen - sated thermocouple temperature requires 14 clock cycles. thirty-two clock cycles are required to read both the thermocouple and reference junction temperatures ( table 2 and table 3 .) the first bit, d31, is the thermocouple temperature sign bit, and is presented to the so pin within t dv of the falling edge of cs . bits d[30:18] contain the converted temperature in the order of msb to lsb, and are presented to the so pin within t d0 of the falling edge of sck. bit d16 is normally low and goes high when the thermocouple input is open or shorted to gnd or v cc . the reference junction temperature data begins with d15. cs can be taken high at any point while clocking out con - version data. if t+ and t- are unconnected, the thermo - couple temperature sign bit (d31) is 0, and the remainder of the thermocouple temperature value (d[30:18]) is 1. figure 1 and figure 2 show the serial-interface timing and order. table 2 and table 3 show the so output bit weights and functions. max31855 cold-junction compensated thermocouple-to-digital converter www.maximintegrated.com maxim integrated 9 downloaded from: http:///
note: the practical temperature ranges vary with the thermo - couple type. table 2. memory mapbit weights and functions table 3. memory mapdescriptions table 4. thermocouple temperature data format table 5. reference junction temperature data format 14-bit thermocouple temperature data res fault bit 12-bit internal temperature data res scv bit scg bit oc bit bit d31 d30 d18 d17 d16 d15 d14 d4 d3 d2 d1 d0 value sign msb 2 10 (1024c) lsb 2 -2 (0.25c) reserved 1 = fault sign msb 2 6 (64c) lsb 2 -4 (0.0625c) reserved 1 = short to v cc 1 = short to gnd 1 = open circuit bit name description d[31:18] 14-bit thermocouple temperature data these bits contain the signed 14-bit thermocouple temperature value. see table 4 . d17 reserved this bit always reads 0. d16 fault this bit reads at 1 when any of the scv, scg, or oc faults are active. default value is 0. d[15:4] 12-bit internal temperature data these bits contain the signed 12-bit value of the reference junction temperature. see table 5 . d3 reserved this bit always reads 0. d2 scv fault this bit is a 1 when the thermocouple is short-circuited to v cc . default value is 0. d1 scg fault this bit is a 1 when the thermocouple is short-circuited to gnd. default value is 0. d0 oc fault this bit is a 1 when the thermocouple is open (no connections). default value is 0. temperature (c) digital output (d[31:18]) +1600.00 0110 0100 0000 00 +1000.00 0011 1110 1000 00 +100.75 0000 0110 0100 11 +25.00 0000 0001 1001 00 0.00 0000 0000 0000 00 -0.25 1111 1111 1111 11 -1.00 1111 1111 1111 00 -250.00 1111 0000 0110 00 temperature (c) digital output (d[15:4]) +127.0000 0111 1111 0000 +100.5625 0110 0100 1001 +25.0000 0001 1001 0000 0.0000 0000 0000 0000 -0.0625 1111 1111 1111 -1.0000 1111 1111 0000 -20.0000 1110 1100 0000 -55.0000 1100 1001 0000 max31855 cold-junction compensated thermocouple-to-digital converter www.maximintegrated.com maxim integrated 10 downloaded from: http:///
applications information noise considerations because of the small signal levels involved, thermocouple temperature measurement is susceptible to powersupply coupled noise. the effects of power-supply noise can be minimized by placing a 0.1f ceramic bypass capacitor close to the v cc pin of the device and to gnd. the input amplifier is a low-noise amplifier designed to enable high-precision input sensing. keep the ther - mocouple and connecting wires away from electrical noise sources. it is strongly recommended to add a 10nf ceramic surface-mount differential capacitor, placed across the t+ and t- pins, in order to filter noise on the thermocouple lines. thermal considerations self-heating degrades the devices temperature measure - ment accuracy in some applications. the magnitude of the temperature errors depends on the thermal conduc - tivity of the device package, the mounting technique, and the effects of airflow. use a large ground plane to improve the devices temperature measurement accuracy. the thermocouple systems accuracy can also be improved by following these precautions: ? use the largest wire possible that does not shunt heat away from the measurement area. ? if a small wire is required, use it only in the region of the measurement, and use extension wire for the region with no temperature gradient. ? avoid mechanical stress and vibration, which could strain the wires. ? when using long thermocouple wires, use a twisted pair extension wire. ? avoid steep temperature gradients. ? try to use the thermocouple wire well within its tem - perature rating. ? use the proper sheathing material in hostile environ - ments to protect the thermocouple wire. ? use extension wire only at low temperatures and only in regions of small gradients. ? keep an event log and a continuous record of thermo - couple resistance. max31855 cold-junction compensated thermocouple-to-digital converter www.maximintegrated.com maxim integrated 11 downloaded from: http:///
note: all devices are specified over the -40c to +125c operating temperature range. +denotes a lead(pb)-free/rohs-compliant package. t = tape and reel. part thermocouple type measured temp range pin-package max31855kasa+ k -200c to +1350c 8 so max31855kasa+t k -200c to +1350c 8 so MAX31855JASA+ j -40c to +750c 8 so MAX31855JASA+t j -40c to +750c 8 so max31855nasa+ n -200c to + 1300c 8 so max31855nasa+t n -200c to + 1300c 8 so max31855sasa+ s -50c to +1600c 8 so max31855sasa+t s -50c to +1600c 8 so max31855tasa+ t -250c to +400c 8 so max31855tasa+t t -250c to +400c 8 so max31855easa+ e -40c to +900c 8 so max31855easa+t e -40c to +900c 8 so max31855rasa+ r -50c to +1770c 8 so max31855rasa+t r -50c to +1770c 8 so package type package code outline no. land pattern no. 8 so s8+4 21-0041 90-0096 max31855 cold-junction compensated thermocouple-to-digital converter www.maximintegrated.com maxim integrated 12 package information for the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages . note that a +, #, or - in the package code indicates rohs status only. package drawings may show a different suffix character, but the drawing pertains to the package regardless of rohs status. ordering information downloaded from: http:///
revision number revision date description pages changed 0 3/11 initial release 1 11/11 corrected esd protection value; added s and r type speciications 1, 2, 3, 8, 12 2 2/12 corrected the thermocouple temperature conditions in the thermal characteristics table and table 1; added clariication to the serial interface section to help users better understand how to communicate with the device; added a recommendation to add a 10nf differential capacitor to the t+/t- pins in the noise considerations section 3, 8, 9, 11 3 7/14 change s type thermocouple minimum temperature in table 1 and ordering information 8, 12 4 11/14 removed automotive reference from data sheet 1 5 1/15 revised beneits and features section 1 maxim integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a maxim integrated product. no circuit patent licenses are implied. maxim integrated reserves the right to change the circuitry and speciications without n otice at any time. the parametric values (min and max limits) shown in the electrical characteristics table are guaranteed. other parametric values quoted in this data sheet are provided for guidance. maxim integrated and the maxim integrated logo are trademarks of maxim integrated products, inc. ? 2015 maxim integrated products, inc. 13 max31855 cold-junction compensated thermocouple-to-digital converter revision history for pricing, delivery, and ordering information, please contact maxim direct at 1-888-629-4642, or visit maxim integrateds website at www.maximintegrated.com. downloaded from: http:///

▲Up To Search▲

Price & Availability of MAX31855JASA

	To Download MAX31855JASA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .